Better Life Technology, LLC
Roll-Out Garage and Concrete Floor Covers
• World's Largest Producer of Garage Floor Protector Mats
• Producer of the World's Widest Roll-Out Garage Floor Covering
—» Introduced in 2008 «—
RaceDay Peel and Stick Tiles are manufactured with
specially formulated, commercial-grade G-Floor material
with peel-off, press & stick backing
• Beautifies garages, shops, and work areas
• Easy to install & custom fit
• Flexible vinyl adheres to uneven floor spots
• Hides cracks and stains in older floors
• Helps prevent concrete floor damage
• Patterned design reduces amount of dirt
tracked into the home
• Cushions floor for anti-fatigue benefit
• Very durable—lasts for years
• 5-year limited warranty
• Virtually seals floor with non-porous surface
• Reduces noise and insulates
• Standard 12"x12" or Jumbo 24"x24" size
RaceDay Peel & Stick Tile
is available in two of the standard
G-Floor surfaces patterns
Diamond Tread Pattern
Levant Surface Pattern
Levant Pattern Peel & Stick tiles
are available 3 beautiful colors
Diamond Tread Peel & Stick tiles
are available 12 exciting colors
3 Basic RaceDay Colors: Black, Grey, and White
Tread Pattern tiles are also stocked
in 9 additional "Fan-Favorite" colors
COLOR NOTE: Due to the nature of process manufacturing, floor tiles
purchased on different days may not be identical in color.
RaceDay Peel & Stick Tile is packaged in these quantities:
12" x 12" (30.5 cm x 30.5 cm) x quantity 20 = 20 sq. ft. (1.86 sq. M)
12" x 12" (30.5 cm x 30.5 cm) x quantity 40 = 40 sq. ft. (3.72 sq. M)
24" x 24" (61.0 cm x 61.0 cm) x quanity 10 = 40 sq. ft. (3.72 sq. M)
G-Floor RaceDay Peel & Stick Tile for use in home offices.
• Product made from solid virgin vinyl providing an extremely tough (gloss finish) that will look great for years, (5 year warranty)
• Easy peel & stick installation compared to competitive products
• Pressure sensitive adhesive backing (virtually seals floors from moisture, etc…)
• Helps prevent concrete damage
• Our tiles do not have to be periodically taken up & cleaned along with floor underneath as is the case with many tile products
• The adhesive we use should never harden completely, so tiles can be moved/re-positioned if necessary
• Material not brittle: won�t chip/crack like many garage tile products
• Resonable cost considering features/benefits when compared to other tile options
• Reduces amount of dirt tracked into home
• Cushions floor, insulates, and reduces noise
• Available in 3 standard colors: black, slate gray, and white
• Standard sizes: 1ft x 1ft and 2ft x 2ft
• RaceDay Tiles are totally made in the USA, man
G-Floor® RaceDay Peel & Stick Tile
used in garages on the 2009 Homes Tour
RaceDay Peel & Stick Tiles are specially formulated, commercial-grade G-Floor
PVC material with peel-off, press & stick backing
Some members of the Handyman Club of America have been testing
RaceDay Peel & Stick Tile in their garages. These
are photos they've sent.
Results of HCOA Member Testing Program
Product Tested: RaceDay Peel & Stick Vinyl Tile
Quantity Tested: Recommend to others: Price Point Approval:
Test Criteria: Perfomance: Quality: Design:
Ease of Installation: Durability:
Size: Versatility: Convenience: Rating Against Similar Products:
Finished Look: Overall Average:
"Easy-to-clean RaceDay Peel & Stick Vinyl Floor Tiles…are durable
vinyl squares that hide imperfections such as cracks and stains and help
to protect floors. They are easy to install and improve the appearance and
functionality of a garage, shop or work area. The tiles act as both a
floor cushion and a vapor barrier, will adhere to uneven areas and come
with a five-year warranty." Handy magazine—August/September 2010—page 73 Click here to download the entire article
To read some of the comments the members made about RaceDay
Peel & Stick Tile, check our "Testimonials" webpage.
Rigid, snap-together tiles leave air gaps at low spots in the concrete floor.
New RaceDay Tile is constructed of flexible G-Floor PVC vinyl with a
peel & stick backing that helps the tiles conform to
low spots in the concrete.
How does RaceDay Peel & Stick Tile
compare with other vinyl floor tiles?
RaceDay Peel and Stick Tile is made of the highest quality solid vinyl
from top to bottom without being layered. Some other flooring tiles only
use high quality materials on the top 10%–20% of their product and
laminate with lower-grade material that does not offer the same protection
throughout. Some products even have three layers of filler using some of
the poorest quality materials available.
• RaceDay tile is resistant to battery acid, oil, salt, antifreeze and
alkali.
• RaceDay tile is tough enough to drive on yet comfortable to walk on.
• The longer it sets, the better it will look.
• RaceDay tile contains no asbestos, lead, or hazardous chemicals at
levels found to be of concern on California Prop 65.
RaceDay Tile is solid polyvinyl with the same resistances
from top to bottom. RaceDay Tile is superior to all other
flooring tile products you can drive or walk on.
RaceDay Peel & Stick Tiles have a 95–mil base thickness
(approximately 0.095"—a bit thicker than a nickel)
before the peel-off adhesive is applied
Installation Guidelines for RaceDay Tile
Tools needed: Utility knife, straight edge, and something to mark
floor. Prep & Installation Instructions (1) How much tile will you need? We recommend that you purchase
about 10% more tile than your project will require. This will allow you to
cover mistakes, trimming and for future possible damage. (2) Clean Floor: Clean sub floor free of grease, wax, dirt, oil,
foreign matter and any chemicals that may be present. Make sure subfloor
is smooth and fill in areas if needed. (3) Preparation of Sub Floor: Concrete must be fully cured
(about 28 days or longer after pouring), free of moisture and alkalinity.
Make standard moisture and alkalinity test if necessary. Moisture and
alkali will not hurt or damage the RaceDay tile, but it can damage the
adhesive and cause it to break down over time. Note: It is the
responsibility of the installer or flooring contractor to determine the
dryness of all concrete subfloors before installation of floor tiles
begins. On grade concrete subfloors must contain an effective, permanent
moisture barrier (floor primer or basement proofer). Plywood/solid wood
subfloors should be dry and fully cured. It is also recommended to use a
primer on wood subfloors for better bond. The primer prevents the adhesive
from being absorbed into the concrete or wood surface. Failure to use
primer over concrete voids warranty. All holes, cracks, and depressions
must be filled with a latex underlayment and any cracks and depressions
must be eliminated. Dust should be removed with a vacuum or damp mop and
dried immediately before applying peal and stick tile. (4) Layout of Room: Lay out some unpeeled tile on floor to see
how your pattern and placement will look before actually applying tile. It
is recommended to always start from a square point and work out. Treat
room as a rectangle and find the center points of two end walls. Mark
floor to insure square point and make a guideline with pencil, ink, laser
or light chalk line for your first row of tile then entire grid if desired
(if using a chalk line make sure you do not have excessive chalk on floor,
it can prevent adhesive from sticking). (5) Laying Tile: Make sure all tile has been stored at room
temperature of at least 65 degrees Fahrenheit for a period of 48 hours. Do
not install tile in conditions less than 55 degrees Fahrenheit. Always
start from center and work out. Peel off release paper and place tile edge
flush with marking line and slowly lower remainder of tile onto floor in a
bent fashion as if you were unrolling a mat. This will keep air out and
assure an even stick. Tile can be peeled back up and repositioned if
required. (6) Boarder Tile: Do not peel off paper from back before you
make your cuts. Turn tile over and place loose tile over last row so that
one end of loose tile is touching the wall. Then mark paper of loose tile
with pencil and cut with knife. Then peel off back of fitted tile, turn
over and put in place. When fitting around obstacles make pattern on paper
and draw an outline on the back of tile paper to cut shape. (7) For best results, be sure to roll your floor in both
directions after installation to make sure all air bubbles are out and
adhesive touches the subfloor. NOTE: Better Life Technology, LLC is not responsible for installation.
Care and Cleaning Guidelines for RaceDay Tile
CLEANING & CARE: Surface is easily washed with floor soap and water. Mild
soaps and other household detergents suitable for floors are usually
effective. Never leave harsh detergents or chemicals on product. Normal
household vinyl cleaners may be used to increase longevity and to remove
stubborn debris. Certain automotive vinyl products may cause surface to
become slippery. Use a non-slip vinyl floor cleaner�protector such as
Armstrong Once �n Done® Floor Cleaner or Armstrong Shinekeeper® Floor
Polish. For best results, follow directions provided with vinyl floor
cleaner. Do not strip, polish, buff or burnish. Scrub floor if needed with
light broom or floor cleaning pad for vinyl flooring. This is not a stain-proof product�certain
dyes, inks, rubber tires, and chemicals may cause permanent staining. Some
non-permanent stains can be removed with spray-on Brake and Tool Cleaner,
found in many auto parts stores, without damaging the product. However, use
of Brake and Tool Cleaner may cause product discoloration. Never use harsh
chemicals such as tar remover or kerosene on this product.
CAUTION � SAFETY WARNING:
Any floor surface may become slippery when moisture or
debris is present. Proper care and cleaning of vinyl flooring
will reduce the likelihood of slips and falls. Always wipe up any oil,
chemicals, or other fluids that may drip or leak from vehicle to prevent
hazardous, slippery conditions. Always dispose of hazardous materials
properly. Never leave chemicals on product or wash into sewer system. Leaving chemicals and fluids on the product for a long period of
time may cause damage, seep underneath the tile, and can breakdown
adhesive. This will void the warranty. If adhesive breaks down or tile becomes loose, tiles can be
reattached with additional adhesive. Pull up loose tiles and clean floor.
Then apply a pressure sensitive adhesive, 3M brand Rubber & Vinyl 80 Spray
Adhesive or G-Floor® brand Clear Pressure Sensitive Adhesive is
recommended. Follow directions provided with adhesive. For rough subfloor conditions or areas that will be subject to
excessive moisture, additional adhesive will be required. Sub floors
must be in a condition that is recommended by the adhesive manufacture for
proper long-term adhesion. Follow all instruction on adhesives for
installation and sub floor preparation and limitations.
All photos, text, and other materials used on this
website are the property of
Better Life Technology, LLC and may not be used without written permission.
NOTE: The Parking Pad and G-FLOOR logos and names are registered trademarks
of Better Life Technology, LLC.
ALSO, The phrase "BLT Roll-Out Garage Flooring" is a registered trademark of
Better Life Technology, LLC.
